Electric bulb holder (12V)

Electric bulb holder (12V)

The principle of the device is very simple. The electric stretcher operates from 220, which it transforms into 12V at the output. The entire conversion process takes place inside the device, under a securely closed housing, unlike self-made electrical loaders, in the manufacture of which, mistakes are rarely made.

The process of nasvaschivaniya one frame with an electric hunter takes you less than 5 seconds, depends on the temperature you set. The grinder has two contacts that are connected to the wire at different angles on different sides of the frame. On the wire put a sheet of honeycomb and turn on the observer. Voltage in 12V will begin to flow along the entire wire, thereby heating it, during which, the wax sheet will begin to melt and crash into the frame, turning off the beater, the wax sheet will stop melting, firmly frozen on the wire.

You can also use an electric stretcher to cut the wax sheets, for this it is only necessary to pull the wire between two nails, connect the nippers at the ends of the pincers, turn on and put a wax sheet on the wire, which will be carefully cut in a few seconds in the right place.